Below you will find a small selection of Hat Blocks. They vary in size, shape and price. Hat Blocks may be ordered by using the contact details provided above. We also offer a custom/ bespoke service. If you wish to send a sketch of what you would like, with your preferred dimensions, we will give you an estimate of price and time scale.
Hope you enjoy what we have to offer.
Spinner Style Hat Block Stand
A spinner hat block stand.
Base is 13.5 cm in diameter.
Height from top to bottom is 22.5 cm and overall height including hat block insert is 5 cm
Width of top base is 9.5 cm
Made from tulipwood.
Sealed and varnished.
These dimensions may be changed
€70.00
Cloche block with removable crown, extension piece and string groove
Handcrafted cloche block with removable crown and optional extension piece.
Brim : Height – 6.5 cm to string groove.
Oval shaped base – 27.5 cm long and 16.5 cm wide.
Removable Crown : 20 cm long ,16.5 cm wide and 9 cm high.
Optional extension piece is 3.5 cm high. (€20 extra)
These measurements may be changed to suit the requirements of individual milliners.
Steel dowel connectors allow for easy assembly.
Made from tulipwood, a soft hardwood, which is easy to pin.
Sealed and varnished.
Stand not included, it may be purchased separately
€270.00
Pork Pie Style Hat Block
Handcrafted hat block
“Pork Pie” style
Round.
String groove
Off- centre crown
Made from tulipwood
18 cm diameter, 6 cm high point, 3 cm high low point
€120.00
Round Sweep Style Hat Block
A round side-sweep pill box hat block with string groove.
6 1/2 inches in diameter .
Highest point is 2 inches high to string groove, lowest point is 1 1/4 inches high to string groove.
Made from tulipwood.
Sealed and varnished.
€90.00
Beret Style Hat Block
Handcrafted millinery hat block
“Percher” style
Made from tulipwood
18 cm long, 13 cm wide at widest point, 7.5 cm high at highest point, tapering down to 0cm at lowest point
Curved base
Stand not included. (May be purchased separately.)
€120.00
Vintage Style Hat Block
A handcrafted hat block, reminiscent of a vintage hat block from the 1900s
7 1/4 inches long, 6 1/4 inches wide, 2 1/4 inches high, 2 1/2 inches high to top of crown
Made from tulipwood, a softer hardwood, which is easy to pin
Sealed and varnished.
€135.00
Double-sided boater brim with optional removable crowns
Double-sided boater brim with removable crown
Handcrafted from tulipwood, a softer hardwood, which is easy to pin
Brim is 14 inches in diameter, sloped on one side and flat on the other side. Also available in 14 1/2″, 15″, etc (up to 19″)
May be used with different crowns, which may be purchased separately (60 euro each ).
Straight pill box style crown is 6 1/2 inches in diameter (other sizes available) and 2 inches high ( may be made to any height requested by the milliner)
Curved pill box crown is 6 1/2 inches in diameter,(other sizes available) 2 inches high sloping down to 3/4 inch to string groove.
Extension block(s) available in different heights
Sealed and varnished.
Steel dowel connectors ensure easy assembly.
€240.00
Pill Box Millinery Style Hat Block
Handcrafted millinery hat block.
13 cm wide, 4.5 cm high.
Made from tulipwood, a softer hard wood.
Easy to pin.
Suitable for use with a hat stand.
Sealed and varnished.
€60.00
Round Domed Pill Box Style Hat Block
A round domed “Pill Box” style hat block.
3 1/4 inches high doming down to 1 1/4 inches on the side.
6 3/4 inches at the widest point tapering in to 6 1/2 inches.
Side is 1 1/4 inches high.
Made from tulipwood, which is easy to pin.
Sealed and varnished.
€100.00
Grooved Style Hat Block
Hand crafted millinery hat block.
A beautiful grooved hat block.
Made from tulipwood, a softer type of hard wood, which is easy to pin.
Sealed and varnished.
17.5 cm long, 16 cm wide and 5 cm high.
€120.00
Button Style Hat Block
Hat Block suitable for milliners.
“Button” block.
14.5 cm wide, 4 cm high. ( size can be adjusted)
Handcrafted.
Made to order according to wishes of the milliner.
Made from tulipwood, a soft hardwood.
Easy to pin.
Sealed and varnished.
Suitable for use with a standard hat stand. (Stand may be purchased separately)
€60.00
Large Button Style Hat Block
Large “Button Style” hat block
6.3/4 inches in diameter, 2 inches high.
Handcrafted from tulipwood, which is easy to pin
Base hollowed out.
Sealed and varnished.
€75.00
Hat Stand
Wooden hat stand
Made from tulipwood
Grooved to hold hat blocking pins
Sealed and varnished
Base is 5 3/4 inches in diameter and 1 3/4 inches high
Wooden rest is 9 inches high and 1 inch in diameter.
Dimensions may be changed to suit individual milliner
€40.00
Katie Rounded Bandeau Block
“Katie” Bandeau Block.
Dome shaped block.
Inside measurements – 16 cm wide and 12 cm high.
Outside measurements – 18 cm wide and 16 cm high.
Base is 6.5 cm from back to front.
Made from tulipwood , which is easy to pin. Handcrafted.
Sealed and varnished.
€90.00
Victoria Bandeau Block with ridged top
The edges are 1.5 cm high.
Handcrafted.
Sealed and varnished.
Sophie Rounded Bandeau Block
“Sophie” Bandeau
A bandeau hat block, with a central ridge on the top.
The sides slope down and are rounded off.
The block is 16 cm wide and 12 cm high – inside measurements.
The outside width is 17.5 cm and the height is 16 cm.
The base is 6.5cm wide from back to front.
Handcrafted from tulipwood, this block is easy to pin.
Sealed and varnished.
Measurements may be adjusted to suit the milliner’s preference.
€90.00
CG Hat Blocks 